Monitor Audio W10 - Black
- The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10" long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.
Monitor Audio MRW10
The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10" long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.
The Monitor MRW-10 boasts an array of features dedicated to optimising a home theatre system. There are three pre-set EQ mode settings (Music, Movie, Impact) to offer a level of adjustment for all rooms and tastes, and the controls use an advanced DSP based architecture to provide the ultimate in audio flexibility.
Technology
- 10" MMP II long throw subwoofer driver
- Rigid MDF cabinet with rear porting
- Powerful 100 W Class D power amplifier – high efficiency and punchy bass delivery
- Switch mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
- DSP processing with all control features and crossover performed in the digital domain
- Three pre-set EQ mode settings. Music / Movie / Impact
- 12 V trigger – provides switching control from AV amp, processor, or home automation control system
- 18 mm thick MDF construction
Specifications:
-
System Format: Rear ported bass reflex cabinet
-
Lower Frequency Limit: 30 Hz (-6 dB)
-
Upper Frequency Limit: Variable 50 – 120 Hz @ 24 dB/Octave
-
Amplifier Output: 100 W RMS
-
Amplifier Classification: Class D with Switch mode PSU
-
Bass EQ Profiles: Music / Movie / Impact
-
Phase Control: 0 – 180°
-
Auto Sensing: >3.5 mV
-
Input Level Requirements: Standby after approximately 15 minutes if no signal sensed
-
Drive Unit Complement: 1 x 10" MMP II long throw driver
-
Input Impedance: >20 K ohms
-
Mains Input Voltage
110 – 120 Vac – 50 – 60 Hz
220 – 240 Vac – 50 – 60 Hz. Selectable -
Fuse Specification
110 – 120 VAC – T4AL/250VAC
220 – 240 VAC – T4AL/250VAC -
Connection
2 x Stereo RCA, 1 x LFE RCA connection
12 V trigger (3.5 mm mono mini-jack) -
External Dimensions (Including Grille and Feet (H x W x D)): 336 x 320 x 350.6 mm (131/4 x 125/8 x 1313/16")
-
Standby Power Consumption: <0.5 W standby
-
Weight: 10.54 kg (23 lb 4 oz)